diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
index b1c3f8f..6f10186 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -5,12 +5,14 @@
  */
 
 #include <common.h>
-#include <asm/arch/cpu.h>
+#include <dm.h>
+#include <ns16550.h>
+#include <dm/platform_data/lpc32xx_hsuart.h>
+
 #include <asm/arch/clk.h>
 #include <asm/arch/uart.h>
 #include <asm/arch/mux.h>
 #include <asm/io.h>
-#include <dm.h>
 
 static struct clk_pm_regs    *clk  = (struct clk_pm_regs *)CLK_PM_BASE;
 static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE;
@@ -41,6 +43,37 @@
 	       &clk->u3clk + (uart_id - 3));
 }
 
+#if !CONFIG_IS_ENABLED(OF_CONTROL) && !defined(CONFIG_SPL_BUILD)
+static const struct ns16550_platdata lpc32xx_uart[] = {
+	{ UART3_BASE, 2, CONFIG_SYS_NS16550_CLK },
+	{ UART4_BASE, 2, CONFIG_SYS_NS16550_CLK },
+	{ UART5_BASE, 2, CONFIG_SYS_NS16550_CLK },
+	{ UART6_BASE, 2, CONFIG_SYS_NS16550_CLK },
+};
+
+#if defined(CONFIG_LPC32XX_HSUART)
+static const struct lpc32xx_hsuart_platdata lpc32xx_hsuart[] = {
+	{ HS_UART1_BASE, },
+	{ HS_UART2_BASE, },
+	{ HS_UART7_BASE, },
+};
+#endif
+
+U_BOOT_DEVICES(lpc32xx_uarts) = {
+#if defined(CONFIG_LPC32XX_HSUART)
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[0], },
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[1], },
+#endif
+	{ "ns16550_serial", &lpc32xx_uart[0], },
+	{ "ns16550_serial", &lpc32xx_uart[1], },
+	{ "ns16550_serial", &lpc32xx_uart[2], },
+	{ "ns16550_serial", &lpc32xx_uart[3], },
+#if defined(CONFIG_LPC32XX_HSUART)
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[2], },
+#endif
+};
+#endif
+
 void lpc32xx_dma_init(void)
 {
 	/* Enable DMA interface */
diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index d76514e..27e60e1 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -16,18 +16,21 @@
 #define CONFIG_NR_DRAM_BANKS_MAX	2
 
 /* UART configuration */
-#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_CONS_INDEX		(CONFIG_SYS_LPC32XX_UART - 2)
-#elif	(CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
+#if	(CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
 	(CONFIG_SYS_LPC32XX_UART == 7)
-#define CONFIG_LPC32XX_HSUART
-#else
-#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
+#if defined(CONFIG_SPL_BUILD)
+/* SPL images do not support LPC32xx HSUART, UART5 is selected for SPL */
+#undef CONFIG_SYS_LPC32XX_UART
+#define CONFIG_SYS_LPC32XX_UART		5
 #endif
 
-#if defined(CONFIG_SYS_NS16550_SERIAL)
+#if !defined(CONFIG_LPC32XX_HSUART)
+#define CONFIG_LPC32XX_HSUART
+#endif
+#endif
 
+#if defined(CONFIG_SPL_BUILD)
+#define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 
@@ -37,14 +40,14 @@
 #define CONFIG_SYS_NS16550_COM4		UART6_BASE
 #endif
 
-#if defined(CONFIG_LPC32XX_HSUART)
-#if	CONFIG_SYS_LPC32XX_UART == 1
-#define HS_UART_BASE			HS_UART1_BASE
-#elif	CONFIG_SYS_LPC32XX_UART == 2
-#define HS_UART_BASE			HS_UART2_BASE
-#else	/* CONFIG_SYS_LPC32XX_UART == 7 */
-#define HS_UART_BASE			HS_UART7_BASE
+#if !defined(CONFIG_SYS_NS16550_CLK)
+#define CONFIG_SYS_NS16550_CLK		13000000
 #endif
+
+#if !defined(CONFIG_LPC32XX_HSUART) || defined(CONFIG_SPL_BUILD)
+#define CONFIG_CONS_INDEX		(CONFIG_SYS_LPC32XX_UART - 2)
+#else
+#define CONFIG_CONS_INDEX		CONFIG_SYS_LPC32XX_UART
 #endif
 
 #define CONFIG_SYS_BAUDRATE_TABLE	\
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 64a0fb0..0abb8e0 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_DEVKIT3250=y
+CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL=y
 # CONFIG_CMD_FPGA is not set
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index 1cad3a2..a5a108e 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_WORK_92105=y
+CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set